Standard Specification For Monel 400 Coils
Specifications : ASTM B127 / ASME SB127
Dimensions : ASTM, ASME, and API
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness : 4mm-100mm
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, hairline, sand blast, Brush, etching, Hot rolled coils (HR), Cold rolled Coils (CR), SATIN (Met with Plastic Coated) etc
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Form : Coils, Foils, Rolls, Plain Coils, Shim Coils, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Chemical / Mechanical Properties
Monel 400 Coils Chemical Composition
Grade |
C |
Mn |
Si |
S |
Cu |
Ni |
Fe |
Monel 400 |
0.30 max |
2.00 max |
0.50 max |
0.024 max |
28.0 - 34.0 |
63.0 min |
2.50 max |
Monel Alloy 400 Coils Mechanical Properties
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
8.8 g/cm3 |
1350 °C (2460 °F) |
Psi – 80,000, MPa – 550 |
Psi – 35,000, MPa – 240 |
40 % |